How often should I have my heat pump serviced?

You should have your heat pump serviced at least once a year. If you use your heat pump for heating and cooling, you should service it twice annually, in the fall and the spring.

What is the life span of a heat pump?

The average life span of a heat pump is 10-15 years. Because heat pumps run year-round to heat and cool your home, they don’t always last as long as a typical heating or cooling system. However, you can extend the life span by ensuring that your unit is routinely maintained by an HVAC professional.

How often should I have my heat pump serviced?

You should have your heat pump serviced at least once a year. If you use your heat pump for heating and cooling, you should service it twice annually, in the fall and the spring.

What is the life span of a heat pump?

The average life span of a heat pump is 10-15 years. Because heat pumps run year-round to heat and cool your home, they don’t always last as long as a typical heating or cooling system. However, you can extend the life span by ensuring that your unit is routinely maintained by an HVAC professional.

Dryer Fire Facts

Fires can occur when lint builds up in the dryer or in the exhaust duct. Lint can block the flow of air, cause excessive heat build-up, and result in a fire in some dryers.

To help prevent fires:

Clean the lint screen/filter before or after drying each load of clothes. If clothing is still damp at the end of a typical drying cycle or drying requires longer times than normal, this may be a sign that the lint screen or the exhaust duct is blocked.

Clean the dryer vent and exhaust duct periodically. Check the outside dryer vent while the dryer is operating to make sure exhaust air is escaping. If it is not, the vent or the exhaust duct may be blocked. To remove a blockage in the exhaust path, it may be necessary to disconnect the exhaust duct from the dryer. Remember to reconnect the ducting to the dryer and outside vent before using the dryer again.

Clean behind the dryer, where lint can build up. Have a qualified service person clean the interior of the dryer chassis periodically to minimize the amount of lint accumulation. Keep the area around the dryer clean and free of clutter.

Replace plastic or foil, accordion-type ducting material with rigid or corrugated semi-rigid metal duct. Most manufacturers specify the use of a rigid or corrugated semi-rigid metal duct, which provides maximum airflow. The flexible plastic or foil type duct can more easily trap lint and is more susceptible to kinks or crushing, which can greatly reduce the airflow.

Take special care when drying clothes that have been soiled with volatile chemicals such as gasoline, cooking oils, cleaning agents, or finishing oils and stains. If possible, wash the clothing more than once to minimize the amount of volatile chemicals on the clothes and, preferably, hang the clothes to dry. If using a dryer, use the lowest heat setting and a drying cycle that has a cool-down period at the end of the cycle. To prevent clothes from igniting after drying, do not leave the dried clothes in the dryer or piled in a laundry basket.